超碰碰97,日韩人妻一区二区三区蜜桃视频,日韩综合人妻Av,天天日天天干天天爽天天日天天做

加入收藏 | 設為首頁 | 聯系我們

產品搜索

聯系我們

聯系人:蔣經理
電話:4008750250
手機:18066071954
地址:南京市棲霞區緯地路9號
Email: zhangxiangwen@cobioer.com

技術文章 / article
當前位置:首頁 > 技術文章 > Western Blot標準操作流程

Western Blot標準操作流程

原載自:m.niangtai.cn[技術資料頻道]  2015-09-24  瀏覽次數:4607

Western blot protocol

Procedure for western blotting

Solutions and reagents:

Lysis buffers

These buffers may be stored at 4°C for several weeks or for up to a year aliquoted and stored at -20°C.

RIPA buffer (Sigma #R0278)
Complete Protease Inhibitor cocktail (Roche #)

PhosSTOP Phosphatase inhibitor Cocktail (Roche #)


1xTBS buffer
20 mM Tris-HCl

150 mM NaCl

Milli-Q Water

pH 7.5

1xTBST buffer

1xTBS buffer

0.1% (v/v) Tween-20

pH 7.5


Running Buffer

100 ml 10x Tris/Glycine/SDS (Bio-Rad #161-0732)

900 ml Milli-Q water


Transfer Buffer

100 ml 10x Tris/Glycine (Bio-Rad #161-0734)

200 ml methanol

700 ml Milli-Q water


Blocking buffer

5% (w/v) milk

Add to TBS buffer. Mix well.


Antibody dilution buffer
5% (w/v) milk

Add to TBST buffer. Mix well.


Procedure:

1. Sample lysis

Preparation of lysate from cell culture

1.     Place the cell culture dish in ice and wash the cells with ice-cold PBS.

2.     Aspirate the PBS, then add ice-cold lysis buffer (1 ml per 107 cells/100 mm dish/150 cm2   flask; 0.5ml per 5x106 cells / 60 mm dish / 75 cm2 flask).

3.     Scrape adherent cells off the dish using a cold plastic cell scraper, then gently transfer the cell suspension into a pre-cooled microcentrifuge tube.

4.     Maintain constant agitation for 30 minutes at 4°C.

5.     Sonicate for 1 minutes (2 seconds working and 3 seconds rest for each cycle)

6.     Spin at 16,000 x g for 20 minutes in a 4°C pre-cooled centrifuge.

7.     Gently remove the tube from the centrifuge and place on ice. Transfer the supernatant to a fresh tube kept on ice, and discard the pellet.

2. Sample preparation

1.     Determine the protein concentration for each cell lysate. (Appendix 1)

2.     To the remaining volume of cell lysate, adjust the concentration of cell lysate at 1 ug/ul with lysis buffer, 4xSample Buffer (Invitrogen # NP0007) and 10xSample Reducing Agent (Invitrogen # NP0009).

3.     To reduce and denature: Boil each cell lysate in sample buffer at 100°C for 5 minutes and aliquot. Store lysates at -20°C. Note: aliquot cell lysates (50- 100 μl) to avoid repeat freeze/thaw cycles.

4.     Defrost tubes containing cell lysate at 37°C. Centrifuge at 16,000 x g in a microcentrifuge for 5 minutes.

3. Loading and running the gel

1.     Load equal amounts of protein into the wells of the SDS-PAGE gel (Bio-Rad # 567-1085), along with molecular weight markers. Load 10- 40 μg of total protein from cell lysate.

2.     Run the gel for 1 to 2 hours at 100 V.

4. Transferring the protein from the gel to the membrane

  1. Cut off nick top left-hand corner of resolving gel for orientation.
  2. Measure the dimensions of the gel and note the positions of the ladder bands.
  3. Transfer gel, while still attached to glass plate, to box containing TGM and peel off gently with a spatula.
  4.  Agitate 15-20 seconds at RT to remove salts and SDS.
  5. Cut a piece of PVDF membrane to the size of the gel and mark and/or clip one corner as the top left-hand corner. Handle only with flat forceps.
  6. Immerse membrane in Transfer buffer for 10-15 seconds.
  7. Cut 2 pieces of >3mm filter paper to the dimensions of the gel (or slightly bigger).
  8. Open a gel holder cassette in a casserole dish, black side down and hinges to the left and below the black side.
  9. Soak a fiber pad with Transfer buffer and place in the center of the black side.
  10. Soak one piece of filter paper with Transfer buffer and place on top of the fiber pad.
  11. Roll out bubbles with glass tube and add 3ml of Transfer buffer onto the top.
  12. Place gel on top of filter paper.
  13. Roll out bubbles with glass tube and add 3ml of Transfer buffer onto the top.
  14. Place membrane on top of gel, with the gel’s top left mark facing the membrane’s top left mark.
  15. Roll out bubbles with glass tube and add 3ml of Transfer buffer onto the top.
  16. Soak a second piece of filter paper with Transfer buffer and place on top of the membrane.
  17. Roll out bubbles with glass tube and add 3ml of Transfer buffer onto the top.
  18. Soak a second piece of fiber pad and place on top of stack.
  19. Roll out bubbles with glass tube and add 3ml of Transfer buffer onto the top.
  20. Close the gel holder cassette.
  21. Place in a transfer tank (orient the red and black sides of the cassette with the red and black panels of the electrode) and fill with Transfer buffer (~2000ml).
  22. Place the tank in a styrofoam box containing ice.
  23. Run 75 minutes at 100V.

5. Antibody staining

1.     Block the membrane for 1-2 hours at room temperature using 5% blocking solution.

2.     Incubate membrane with appropriate dilutions of primary antibody (Appendix 2) in antibody dilution buffer overnight at 4°C.

3.     Wash the membrane in three washes of 1xTBST, 5 minutes each.

4.     Incubate the membrane with the recommended dilution of labeled secondary antibody in antibody dilution buffer at room temperature for 1 hour.

5.     Wash the membrane in three washes of 1xTBST, 5 minutes each, then rinse in 1xTBS.

6.     Scan the membrane according to the manual of Obyssey.




Appendix 1

Preparation of Standards and Working Reagent

A. Preparation of Diluted Albumin (BSA) Standards

Use Table 1 as a guide to prepare a set of protein standards. Dilute the contents of one Albumin Standard (BSA) ampule into several clean vials, preferably using the same diluent as the sample(s). Each 1mL ampule of 2mg/mL Albumin Standard is sufficient to prepare a set of diluted standards for either working range suggested in Table 1. There will be sufficient volume for three replications of each diluted standard. Table 1. Preparation of Diluted Albumin (BSA) Standards

Dilution Scheme for Standard Test Tube Protocol and Microplate Procedure (Working Range = 20-2,000μg/mL)

Vial

Volume of Diluent

(μL)

Volume and Source of BSA (μL)

Final BSA Concentration (μg/mL)

A

0

300 of Stock

2000

B

125

375 of Stock

1500

C

325

325 of Stock

1000

D

175

175 of vial B dilution

750

E

325

325 of vial C dilution

500

F

325

325 of vial E dilution

250

G

325

325 of vial F dilution

125

H

400

100 of vial G dilution

25

I

400

0

0 = Blank

B. Preparation of the BCA Working Reagent (WR)

1. Use the following formula to determine the total volume of WR required:

(# standards + # unknowns) × (# replicates) × (volume of WR per sample) = total volume WR required

Example: for the standard test-tube procedure with 3 unknowns and 2 replicates of each sample:

(9 standards + 3 unknowns) × (2 replicates) × (2mL) = 48mL WR required

Note: 2.0mL of the WR is required for each sample in the test-tube procedure, while only 200 μl of WR reagent is required for each sample in the microplate procedure.

2. Prepare WR by mixing 50 parts of BCA Reagent A with 1 part of BCA Reagent B (50:1, Reagent A:B). For the above example, combine 50mL of Reagent A with 1mL of Reagent B.

Note: When Reagent B is first added to Reagent A, turbidity is observed that quickly disappears upon mixing to yield a clear, green WR. Prepare sufficient volume of WR based on the number of samples to be assayed. The WR is stable for several days when stored in a closed container at room temperature (RT).

Microplate Procedure (Sample to WR ratio = 1:8)

1. Pipette 25μL of each standard or unknown sample replicate into a microplate well (working range = 20-2000μg/mL).

Note: If sample size is limited, 10μL of each unknown sample and standard can be used (sample to WR ratio = 1:20). However, the working range of the assay in this case will be limited to 125-2000μg/mL.

2. Add 200μL of the WR to each well and mix plate thoroughly on a plate shaker for 30 seconds.

3. Cover plate and incubate at 37°C for 30 minutes.

4. Cool plate to RT. Measure the absorbance at or near 562nm on a plate reader.


 

 

化工儀器網

推薦收藏該企業網站
熟妇女人妻619丰满香蕉| 不卡一区二区三区中文字幕| 亚洲一区二区三区啪啪啪动态图| 麻豆视频国产一区国产二区| 啪啪啪精品一区| 超碰日本的| 欧美超级一区AAA| 高清蜜桃福利在线观看| 影音先锋姿势操| 91成人激情0| 无码天堂电影| 久久久国产精品成人免费| 日本五十路亲子中出免费观看| 亚洲欧美日本色一区| 超碰在线91一区喷水| 亚洲AV片,免费看的网站| 插死她综合网| 日韩tv亚洲tv| 老司机干人妻| 好吊妞色综合视频l| 欧美一区二区三区顶级黄片| 亚洲91麻豆精品| 日B视频分集着| 古代激情视频小说在线观看| 人妻交换麻豆| 久久婷婷性愛-| 欧美不卡在线一区| 国产色婷婷八区| 日本艹中文字幕| 少妇蜜桃自拍| 精品一三三三区| 久久综合欧美久久综合网| 午夜香蕉久久大片| 人妻内射31p| *无码一区二区| 国产综合夫妻| 极品主播 p 在线| 欧美黄经典一区二区三区| 日韩日日伦理网站| 丰满午夜人妻无码AAAA| 二区三区乱码|